Painter holding a brush and a tin of paint

Anti-mould paint in Singapore: the right one for each room, and the damp to fix first

Last checked 5 Nov 2026 against the sources at the end of this page.

The right anti-mould paint depends on the room: a ceiling paint made for steam in the bathroom, a washable wall paint in the kitchen, and a low-odour wall paint in the bedroom. None of them will hold on a wall that's still wet, so the damp gets fixed first.

When mould comes back through a new coat, it's usually because the old mould was never killed or the water never stopped. The paint takes the blame anyway.

In short

  • Anti-mould paint stops mould growing on the paint, but won't kill mould already on the wall.
  • Kill the mould and let the wall dry before you paint. Seal any stain it left.
  • If a leak or a dripping aircon keeps the wall wet, the mould comes back whatever you use.
RoomWhat the paint has to doExamples the makers sell for it
Bathroom ceilingResist steam and mouldNippon Odour-less Anti-Mould Ceiling White, Dulux Mouldguard
Kitchen wallResist mould and wipe clean of greaseDulux Wash & Wear, Nippon EasyWash & Clean
Bedroom wall by the airconResist mould with very little smellNippon Odour-less All-in-1, Nippon Vinilex 5000, Dulux Pentalite, Jotun Majestic True Beauty Matt

Will anti-mould paint stop mould coming back?

On the paint film, yes. Behind it, no. Ronseal, a UK paint maker, says on its anti-mould guide (read 4 Nov 2026) that its anti-mould paint uses a biocide that stops mould growing on the paint, which is why it must be the top coat.

HDB blocks work the same way. The Ministry of National Development said in a written answer to Parliament on 7 Feb 2023 (read 4 Nov 2026) that HDB's outside walls get 1 coat of water-based sealer and 2 coats of algae-resistant paint, and the paint holds a biocide that stops algae growing. A sealer under a biocide top coat is the system you want on a damp wall indoors too.

The water is the part paint can't touch. In its 2020 written answer (read 4 Nov 2026), MND said mould in HDB flats is usually caused by insufficient ventilation, since high humidity encourages it to grow.

Fix the damp first, then kill the mould

Anti-mould paint is the last coat, so most of the work happens before you open the tin.

  1. Start with the water: run the exhaust fan after every shower, have a dripping aircon drain fixed, or get the leak from upstairs repaired.
  2. Next, treat the patch with a fungicidal wash. Nippon's Anti-Fungus Solution page (read 4 Nov 2026) says it kills remaining fungus spores and should be left on for at least 12 hours. Dulux's bathroom guide (read 4 Nov 2026) suggests a dilute bleach solution or mould cleaner the day before, with eye and skin protection.
  3. Then give the wall time to dry out. Nippon's paint pages ask for no water on the surface and a moisture reading below 4%.
  4. Scrape off any loose paint and fill cracks with a water-resistant filler.
  5. Where the mould left a stain, put a sealer on first. Nippon says its Vinilex 5170 Wall Sealer (read 4 Nov 2026) is anti-fungus and stops stain marks resurfacing on problem surfaces. Our sealer guide covers when a wall needs one.
  6. Finish with two coats of the anti-mould paint that suits the room.

If you skip the fungicidal wash, spores left on the wall can grow back through the new paint.

Mould on the bathroom ceiling: which paint to use

A bathroom ceiling takes steam every day. Use a ceiling paint made for it.

The only Nippon paint with "anti-mould" in its name is a ceiling paint: Odour-less Anti-Mould Ceiling White (read 4 Nov 2026). Nippon says it protects against most species of mould and resists water with almost no paint odour. It lists kitchens, bathrooms and the areas around air-conditioners as where it belongs.

The same Dulux guide recommends a bathroom paint such as Dulux Mouldguard, which Dulux says helps surfaces repel mould and withstand water, steam and moisture.

Does the same patch keep coming back above the shower? Then the ceiling has a water problem that paint won't solve. Our guide to mould on the ceiling works out whether it's steam, the aircon or the flat above.

Mould on the kitchen wall: which paint to use

You'll be wiping kitchen walls, because steam and grease land on them together. Pick a washable anti-mould wall paint.

Dulux says Wash & Wear (read 4 Nov 2026) is anti-mould and anti-bacterial, and soya sauce and chilli sauce are on its list of 10 stains that wipe off. Dulux also says coffee and black tea only partly come off. Nippon says EasyWash & Clean (Low Sheen) (read 4 Nov 2026) protects against fungus and mould and has outstanding washability.

Nippon lists kitchens for its Anti-Mould Ceiling White as well, so the kitchen ceiling can take the same paint as the bathroom one. Run the hood whenever you cook, or the steam settles on whichever paint you chose.

Mould on the bedroom wall by the aircon: which paint to use

You sleep in this room, so the smell matters as much as the mould.

Nippon says Odour-less All-in-1 (read 4 Nov 2026) is formulated without VOCs and gives a mould-resistant finish, with extremely low odour during and after painting. Its Vinilex 5000 (read 4 Nov 2026) is a low-VOC, low-odour matt wall paint that Nippon says protects against fungus and mould. Dulux lists Pentalite (read 4 Nov 2026) as anti-mould and low VOC. Jotun says Majestic True Beauty Matt (read 4 Nov 2026) is anti-fungal and low odour.

A strip of mould right under the indoor unit usually means aircon water. The cold pipes sweat, or the drain leaks down the wall. Have it checked before you repaint, or the new coat goes mouldy along the same line.

Which Nippon anti-mould paint is right for your room?

Only one Nippon paint has "anti-mould" in its name, but several list mould resistance. Here's what Nippon's product pages say (read 4 Nov 2026):

Nippon productWhat Nippon saysUse it for
Odour-less Anti-Mould Ceiling WhiteProtects against most species of mould, almost no odourBathroom and kitchen ceilings, around aircons
Odour-less All-in-1Mould-resistant finish, no VOCs, washableBedrooms and living rooms you're living in
Vinilex 5000Low VOC, low odour, protects against fungus and mouldInterior walls
EasyWash & Clean (Low Sheen)Protects against fungus and mould, stain resistantKitchens, hallways, living areas
MatexAnti-fungus matt emulsionInterior walls and ceilings
Vinilex 5170 Wall SealerAnti-fungus sealer, stops stains resurfacingUnder the top coat on problem walls

Choosing between Vinilex 5000 and Matex for the rest of the flat? Our Vinilex 5000 vs Matex comparison sets the two side by side.

When to hire a painter for a mouldy room instead of doing it yourself

Call a painter once the mould has come back through a coat you've already painted, or when the paint is bubbling and flaking. A high ceiling or one over a bathtub is a good reason too. Rust lines or cracked concrete under the mould mean spalling, which gets repaired before any paint goes on.

The same team plasters, repairs spalling and paints, so a damaged wall doesn't need three trades. On condo jobs we handle the MCST permits and deposits. We also record the paint brand, product, colour code and batch for your address, so a touch-up matches later.

Want a painter to look at it? message us on WhatsApp.

Sources

Send us a photo of the mouldy wall or ceiling and tell us which room it's in.
We'll tell you whether the damp needs fixing first, and quote usually within the hour in working hours.

WhatsApp us a photo of your wall

Open 7 days, 9am to 6pm.

Anti-mould paint in Singapore: the full guide

Paint does not fix mould on its own

Mould needs moisture and something to feed on. Anti-mould paint deals with the second half by carrying a biocide in the film, so spores landing on the surface cannot colonise it. What it cannot do is remove the moisture feeding them.

If a wall is wet because a pipe leaks, a waterproofing membrane has failed, or the unit above is tracking water down, anti-mould paint buys you months. Find the water first. We will tell you which one you have before quoting.

Killing what is already there

Spores painted over stay alive under the film and push back through, usually within a year and usually in the same pattern. Before any coating goes on, the affected area gets washed with a fungicidal solution, left to dwell, then scraped and allowed to dry.

Skipping the dwell time is the most common shortcut. The wash needs contact time to work, and a wall wiped and immediately painted is a wall that will bloom again.

Where Singapore homes actually get it

Bathroom ceilings and the wall behind the shower. Service yards, especially enclosed ones with a single vent. The wall behind a wardrobe pushed flat against an external face. Under and around air-conditioning ledges, where cold surfaces meet humid air and condense.

North-facing walls that never take direct sun stay damp longest after rain, which is why the same block can have one unit with a mould problem and its neighbour without.

What the products do and how long they last

The biocide sits in the paint film and depletes over time. Most anti-mould emulsions hold their resistance for around five years in a Singapore bathroom, less if the room is poorly ventilated and the surface stays wet for hours after a shower.

We use the Nippon and Dulux anti-mould ranges. Both are low odour, both wash without burnishing, and both cost more per tin than a standard emulsion. Across a whole flat the anti-mould specification adds roughly $350.

Ventilation does more than the paint

A bathroom fan that runs for ten minutes after a shower removes more moisture than any coating resists. If the service yard has one vent and a closed door, the air does not move and the wall stays damp.

We say this at the quote stage because it is the difference between a repaint that holds and one you call us back about.

When it is not a paint job

Black spotting that returns within weeks, a wall that feels cold and damp to the touch, or staining that spreads in a line rather than a patch, all point at water rather than surface mould. That is a leak or a waterproofing repair, and painting it is money spent twice.

Common questions

Does anti-mould paint stop mould coming back?

Only if the moisture is dealt with first. The biocide in the film stops spores colonising the surface for around five years, less in a poorly ventilated bathroom. A wall that is wet from a leak will bloom through any coating.

Can you paint over mould?

No. Spores painted over stay alive under the film and push back through in the same pattern, usually within a year. The area has to be washed with a fungicidal solution, left to dwell, scraped and dried before anything is applied.

Frequently Asked Questions

Can you paint over mould with anti-mould paint?

No. Anti-mould paint stops new mould growing on its surface, but it doesn't kill what's already there, so the mould grows back through the new coat. Kill it first with a fungicidal wash and leave it on for the time on the label. Let the wall dry and seal any stain. Nippon's Anti-Fungus Solution page says to leave it on for at least 12 hours before you paint.

How long does anti-mould paint last?

As long as the wall behind it stays dry. Dulux says its bathroom paints have a 5-year anti MouldTec formula, but that's the maker's best case. In a bathroom with no working fan, or under an aircon that drips, mould can return much sooner because the water keeps coming. Fix the source first, and wipe the walls down now and then.

Is Nippon Matex anti-mould?

Nippon lists Matex as anti-fungus for interior walls and ceilings, but doesn't call it anti-mould. The Nippon paints that list mould resistance are Odour-less Anti-Mould Ceiling White, Odour-less All-in-1, Vinilex 5000 and EasyWash & Clean. For a bathroom or kitchen ceiling, Nippon points you to the Anti-Mould Ceiling White.

Which anti-mould paint smells least in a bedroom?

Look for one the maker sells as low odour or odourless. Nippon says Odour-less All-in-1 has extremely low odour during and after application and is formulated without VOCs. Dulux lists Pentalite as low odour and low VOC. Paint with the windows open and keep the bedroom door shut so the smell stays in one room.

Does anti-mould paint work on outside walls?

Outside walls take an exterior algae-resistant paint. MND says HDB block walls get a water-based sealer and two coats of algae-resistant paint with a biocide in it. When mould comes back on HDB external walls, the Town Council cleans them, patches the cracks and repaints them as part of maintaining common property. On a landed house, that job is yours.